loader


Making the best solutions even better — that's the challenge.

Magnetic Autocontrol has been setting the standards for security solutions in the area of access and entry control for many years.

Access control for vehicles

To turn the page, please click on the upper or lower right corner.

Our Products for
Vehicle Access Control


Access control barriers

Controlling access of vehicles and persons has become ever more important in recent times. The Magnetic.Access barriers are complete, cost-oriented solutions for access controls at public car parks, company premises or other entranceways. Our seven models include the right solution for every use.

The MHTM™ drive unit (servo technology) used in all barriers is a technological milestone, operates maintenance-free and is energy efficient. The MGC drive unit employed offers a variety of enhancement options, depending on the version, and offers a high level of operating convenience.

Magnetic.Access

Our Access barrier is designed for a barrier width of up to 3.5 m. The short opening and closing times of just 2.2 seconds make it possible to pass through quickly. Besides the design, there is an impressively great basic functionality which meets almost all demands. The housing height is reduced to a minimum through the use of our VarioBoom. The model is delivered in the standard housing colour combination RAL 2000 with doors in dark grey. Special colours are available upon request.

Magnetic.Access Pro

The Magnetic Access Pro barrier with its fast opening and closing times of as little as 1.3 seconds is especially suitable for use in heavily trafficked areas. Here too the barrier width goes up to 3.5 m. Compared with the Magnetic.Access model, the Pro version offers a greater range of functions, additional enhancement options with plug-in modules, and exclusive accessories. The barrier is available in three standard colour combinations (RAL 2000, RAL 9006, RAL 9007). Special colours are available upon request.

MicroDrive_RAL2000

This all-round barrier was developed especially for access roads with a barrier width between 3.5 and 5.0 m. The opening and closing time is 4 seconds. The model is delivered in the standard housing colour combination RAL 2000 with doors in dark grey. Special colours are available upon request.

Access_hellgrau_offen_VarioBoom

The Pro-version with expanded functions for barrier widths between 3.5 and 6.0 m. The opening and closing time is 4 seconds. This barrier includes the same components as the Magnetic.Access Pro barrier, with a drive system suited especially to the longer boom. The barrier is available in three standard colour combinations (RAL 2000, RAL 9006, RAL 9007). Special colours are available upon request.

Access Pro-H

The Magnetic.Access Pro-H barrier is designed especially for access solutions with a grating of up to 6 m barrier width. The opening and closing time is 4 seconds. It includes the same components as the model Magnetic.Access Pro-L, but the housing is adjusted for height. There are three different grating versions available. The barrier is available in three standard colour combinations (RAL 2000, RAL 9006, RAL 9007). Special colours are available upon request.


The Magnetic.Access XL 2 barrier was developed for barrier widths between 6 m and 8.5 m. The opening and closing time is 6 seconds. Our XL and XXL models are based on a larger housing system and offer optimum accessibility for the installation of further options. The functionality can be easily and quickly adapted to individual customer specifications with plug-in add-on modules. The housing with its internal carrier frame is particularly sturdy. The model is delivered in the standard housing colour combination RAL 2000 with doors in dark grey. Special colours are available upon request.



The Magnetic.Access XXL barrier was developed especially for use with barrier widths of up to 10 m. The opening and closing time is 8 seconds. Our XXL model, like the XL model, is based on a larger housing system and offers optimum accessibility for the installation of further options. The functionality can be easily and quickly adapted to individual customer specifications with plug-in add-on modules. The housing with its internal carrier frame is particularly sturdy. The drive system was adapted to suit the boom length. The model is delivered in the standard housing colour combination RAL 2000 with doors in dark grey. Special colours are available upon request.




Parking barriers

Whether for a parking garage, underground parking or an open-air car park: the barrier is always the central element. Magnetic.Parking barriers were specially developed for high-traffic areas. Their appeal lies in durabilty and quality, low maintenance and low operating costs, as well as optimal ease of integrating them into existing systems and environments. In short: Magnetic.Parking barriers are the first choice for parking garage operators and solution providers for reliable entrance and exit controls in parking garages, underground parking and open-air car parks.

• High functionality
• 10 million opening and closing movements
• Award-winning design
• Low power consumption
• Safety control in compliance with EN 13849
• High operating convenience due to ideal accessibility

Access_hellgrau_offen_VarioBoom

Our Parking Pro barrier with its fast opening and closing times of as little as 1.3 seconds is especially suitable for use in heavily trafficked areas. The barrier width goes up to 3.5 m. This model includes a large range of features, with further options available by means of plug-ins and accessories. The barrier is available in three standard colour combinations (RAL 2000, RAL 9006, RAL 9007). Special colours are available upon request.

Toll barriers

Modern toll stations are high-tech facilities where speed and reliability count first and foremost. Magnetic.Toll barriers were conceived especially for this use and offer tremendous reliability along with high speeds, the highest quality and maximal user friendliness. Thanks to the multiple inputs and outputs and the optional interface module, different payment systems can be included with no problem. In short: Magnetic.Toll barriers set the new standard in the area of toll barriers.

• High functionality
• 10 million opening and closing movements
• Award-winning design
• Low power consumption
• Safety control in compliance with EN 13849
• High operating convenience due to ideal accessibility
• All Toll models are available either with an MGC control unit with
  or without a detector module, or with an MGC Pro control unit
• Standard colour RAL 2000, special colours possible

Magnetic.Toll

The Magnetic.Toll model is ideally suited for use at all toll stations, due to an opening time of as little as 1.3 seconds and its high reliability and durability. The barrier width goes up to 3 m. There is a choice between three different barrier booms and flanges.

Magnetic.Toll Pro

The Magnetic.Toll Pro model offers an opening time of 0.9 seconds and is thus suited to highly trafficked toll stations. The barrier width goes up to 3 m. There is a choice between three different barrier booms and flanges.


The Magnetic.Toll Pro-2 model offers an opening time of 0.7 seconds and is thus suited to highly trafficked toll stations. The barrier width goes up to 3 m. There is a choice between two different barrier booms and flanges.

Magnetic.Toll Pro

The Magnetic.Toll HighSpeed model with its opening time of just 0.6 seconds offers even greater speed and is therefore suited to highly trafficked facilities with automatic transponder solutions.

The barrier width goes up to 3 m. There is a choice between three different barrier booms and flanges.


Our Magnetic.Toll HighSpeed 2, with an opening time of 0.3 seconds, is the turbo among the toll barriers. The barrier width goes up to 1.5 m. There is a choice between two different barrier booms and flanges.

Controlled access for Pedestrians

To turn the page, please click on the upper or lower right corner.

Our Products
Access Control Pedestrians


Access Controls

Access Control

Access controls control access according to policies set by the operator: "WHO-WHEN-WHERE". Magnetic Autocontrol is a pioneer in this branch and offers a variety of solutions for various uses. All Magnetic barriers are easy to install, easy to use and can easily be tied in to higher-level control systems.

The drive unit MHTM™ (servo technology), which is used in all products, is a technological milestone and functions maintenance-free, is energy-efficient and operates extremely quietly. The integrated control equipment can be used with all conventional access systems and makes standard bi-directional use possible.

MPS

The MPS product series was developed especially for access control situations with low security demands and is suitable for indoor and outdoor use. The housing, made from a high-quality polished V2A stainless steel tube, has a diameter of 159 mm. All components for operating the barrier are built-in, which minimises the installation time and allows the system to be put into operation quickly. The product can be equipped with various blocking elements, elegantly in glass, break-proof in acrylic or durable with a stainless steel bracket (optionally with an inlay). For use in escape routes we offer a version that has been tested by external parties.

• Energy-saving MHTM™ drive unit
• Variable barrier widths
• Suited for bicycles and wheelchairs
• Software for convenient parameterisation
• Free passage in the event of power failure
• Optional: Authorisation for emergency escape routes

MPP

The MPP product series is appropriate for accesses with low to middle security requirements, allowing one person through at a time. Depending on the model, the housing is made of high-quality polished V2A stainless steel (MPP 212 / 222) or of chromium steel (MPP 112 / 122). The barrier arms, likewise made of stainless steel, withstand even the highest stress loads – such as in the case of vandalism. Unauthorised attempts at access activate a brake which blocks the passage (adjustable). As an alternative, we offer patented Drop-Arm technology. With this technology, the barrier arm drops down in the case of a voltage drop (or feedback from a fire alarm system) and automatically raises itself again in the case of voltage recovery. The time-consuming need for a person to lock the arm into place is eliminated. Depending on the application, three different versions are available.

• Energy-saving MHTM™ drive unit
• Patented Drop-Arm security approval
• Software for convenient parameterisation
• Integration of access or payment control systems
• Free passage in the event of power failure
• Simple integration of identification media (MPP 122 / 222)

MPW

The MPW product line is ideal for closing off indoor passages that call for quick, contactless separation of persons. The barrier closes immediately after the person has passed through, or after a defined time has elapsed. The barrier can be operated single- or bi-directionally. The housing is made of high-quality polished stainless steel, and the flush doors are of acrylic or tempered safety glass. The parameterisation takes place via DIP switches on the control equipment. Light barriers in the passage reliably recognise persons and objects. In the event that contact takes place, the drive unit has a sensitive touch recognition sensor. The light barriers also reliably report persons attemping to follow, passage in the wrong direction or entrance without authorisation. How the barrier should react in these situations can be defined by the customer. A line consists of at least two modules.

• Energy-saving MHTM™ drive unit
• Slim design
• Standard width and wider passages
  for e.g. prams and wheelchairs can be combined
• Free passage in the event of power failure
• Simple integration of identification media

MPR

The MPR product line is ideal for closing off indoor passages that call for quick, contactless separation of persons and have low to middle security requirements. The housing is made of high-quality polished stainless steel and is available in two versions (standard width and extra wide). The blocking elements are made of a choice of aluminium, self-extinguishing PU-foam (choice of colours) or acrylic. The barrier can be operated single- or bi-directionally. The parameterisation takes place via DIP switches on the control equipment. Light barriers in the passage reliably recognise persons and objects. In the event that contact takes place, the drive unit has a sensitive touch recognition sensor. The light barriers also reliably report persons attempting to follow, passage in the wrong direction or entrance without authorisation. How the barrier should react in these situations can be defined by the customer. A line consists of at least two modules.

• Energy-saving MHTM™ drive unit
• Slim design
• Quick separation of persons with an opening time
  of approx. 0.3 seconds
• Standard width and wider passages
  for e.g. prams and wheelchairs can be combined
• Free passage in the event of power failure
• Simple integration of identification media

MPH

The MPH product line is ideal for closing off indoor passages with middle to high security requirements that call for quick, contactless separation of persons. Closing occurs immediately after passage or after an adjustable hold-open time. The barrier can be operated single- or bi-directionally. The housing is made of high-quality polished stainless steel, and the doors are of tempered safety glass. Depending on the security requirements, the doors are available in three different heights (1200, 1500 and 1800 mm). The parameterisation takes place via DIP switches on the control equipment. Light barriers in the passage reliably recognise persons and objects. In the event that contact takes place, the drive unit has a sensitive touch recognition sensor. The light barriers also reliably report persons attempting to follow, passage in the wrong direction or entrance without authorisation. How the barrier should react in these situations can be defined by the customer. A line consists of at least two modules.

• Energy-saving MHTM™ drive unit
• Standard width and wider passages   for e.g. prams and wheelchairs can be combined
• Free passage in the event of power failure
• Maintenance-free operation, no wearing parts
• Gentle and quiet operation
• Simple integration of identification media

MPT

The turnstile MPT was developed especially for use in outdoor areas and for separating persons for open-air security concerns. The turnstile can bei operated in both directions. Due to the modular construction, the turnstile can be mounted on location without the use of lift trucks. The housing is made of galvanised steel (available with an optional powder coating). Individual components such as the centre are also available in stainless steel. Through the use of various materials, drive options and additional components, the MPB can be customised for individual customer needs. An add-on pillar allows the integration of access control elements such as RFID readers, finger scanners, etc. The integrated control equipment can be operated with all conventional access systems. The rugged construction and the maintenance-free, energy-efficient MHTM™ drive distinguish this solution. By means of an optional foundation frame, it is possible to install the element on top of paving stones.

• Energy-saving MHTM™ drive unit (motorised version)
• Sensitive touch-recognition sensor
  for the greatest possible safety of people
• Maximum convenience by adjusting the rotation speed
• Free passage in the event of power failure
• Simple integration of identification media
• Maintenance-free operation, no wearing parts
• Many options for individualisation

MPG

The pedestrian access barrier MPG is appropriate for blocking wide outdoor passages where no separation of persons is necessary. The product can be operated in combination with the turnstile (MPG162) or as a "stand-alone" version (MPG172). The swing barrier can be operated in both directions, activated by the access control. The swing barrier is also offered with an optional one- or two-sided induction loop for bicycles. The housing is made of galvanised steel (available with an optional powder coating). Individual components such as the barrier are also available in stainless steel. An add-on pillar allows the integration of access control elements such as RFID readers, finger scanners, etc. Through the use of various materials, drive options and additional components, the MPB can be customised for individual customer needs. The integrated control equipment can be operated with all conventional access systems. The rugged construction and the maintenance-free, energy-efficient MHTM™ drive distinguish this solution.

• Energy-saving MHTM™ drive unit (motorised version)
• Sensitive touch-recognition sensor
  for the greatest possible safety of people
• Free passage in the event of power failure
• Maintenance-free operation, no wearing parts
• Extensive enhancement options
• Simple integration of identification media
• Many options for individualisation

MPB

The pedestrian and bicycle barrier MPB combines a turnstile for personal access with a swing barrier for bicycles. When the induction loop recognises the presence of a bicycle, the swing barrier for the bicycle opens automatically as the turnstile is entered. Our MPB offers a secure and quick access solution for bicycles and their riders – particularly suited for factory premises and bicycle parking garages. An add-on pillar allows the integration of access control elements such as RFID readers, finger scanners, etc. The rugged construction, the well thought out detailed solutions and the maintenance-free, energy-efficient MHTM™ drive distinguish this solution. Through the use of various materials, drive options and additional components, the MPB can be customised for individual customer needs. The integrated control equipment can be operated with all conventional access systems.

• Energy-saving MHTM™ drive unit (motorised version)
• Sensitive touch-recognition sensor
  for the greatest possible safety of people
• Maximum convenience by adjusting the rotation speed
• Induction loop detector for recognising bicycles
• Free passage in the event of power failure
• Maintenance-free operation, no wearing parts
• Many options for individualisation




Perimeter protection

Access control for public or private premises is a complex issue, whether you want to protect a nuclear power plant, an airport or your personal property. Every area of application has its own particular challenges.

MPT

The turnstile MPT was developed especially for use in outdoor areas and for separating persons for open-air security concerns. The turnstile can bei operated in both directions. Due to the modular construction, the turnstile can be mounted on location without the use of lift trucks. The housing is made of galvanised steel (available with an optional powder coating). Individual components such as the centre are also available in stainless steel. Through the use of various materials, drive options and additional components, the MPB can be customised for individual customer needs. An add-on pillar allows the integration of access control elements such as RFID readers, finger scanners, etc. The integrated control equipment can be operated with all conventional access systems. The rugged construction and the maintenance-free, energy-efficient MHTM™ drive distinguish this solution. By means of an optional foundation frame, it is possible to install the element on top of paving stones.

• Energy-saving MHTM™ drive unit (motorised version)
• Sensitive touch-recognition sensor
  for the greatest possible safety of people
• Maximum convenience by adjusting the rotation speed
• Free passage in the event of power failure
• Simple integration of identification media
• Maintenance-free operation, no wearing parts
• Many options for individualisation

MPG

The pedestrian access barrier MPG is appropriate for blocking wide outdoor passages where no separation of persons is necessary. The product can be operated in combination with the turnstile (MPG162) or as a "stand-alone" version (MPG172). The swing barrier can be operated in both directions, activated by the access control. The swing barrier is also offered with an optional one- or two-sided induction loop for bicycles. The housing is made of galvanised steel (available with an optional powder coating). Individual components such as the barrier are also available in stainless steel. An add-on pillar allows the integration of access control elements such as RFID readers, finger scanners, etc. Through the use of various materials, drive options and additional components, the MPB can be customised for individual customer needs. The integrated control equipment can be operated with all conventional access systems. The rugged construction and the maintenance-free, energy-efficient MHTM™ drive distinguish this solution.

• Energy-saving MHTM™ drive unit (motorised version)
• Sensitive touch-recognition sensor
  for the greatest possible safety of people
• Free passage in the event of power failure
• Maintenance-free operation, no wearing parts
• Extensive enhancement options
• Simple integration of identification media
• Many options for individualisation

MPB

The pedestrian and bicycle barrier MPB combines a turnstile for personal access with a swing barrier for bicycles. When the induction loop recognises the presence of a bicycle, the swing barrier for the bicycle opens automatically as the turnstile is entered. Our MPB offers a secure and quick access solution for bicycles and their riders – particularly suited for factory premises and bicycle parking garages. An add-on pillar allows the integration of access control elements such as RFID readers, finger scanners, etc. The rugged construction, the well thought out detailed solutions and the maintenance-free, energy-efficient MHTM™ drive distinguish this solution. Through the use of various materials, drive options and additional components, the MPB can be customised for individual customer needs. The integrated control equipment can be operated with all conventional access systems.

• Energy-saving MHTM™ drive unit (motorised version)
• Sensitive touch-recognition sensor
  for the greatest possible safety of people
• Maximum convenience by adjusting the rotation speed
• Induction loop detector for recognising bicycles
• Free passage in the event of power failure
• Maintenance-free operation, no wearing parts
• Many options for individualisation

Automatic Fare Collection

Rigorous ticket control and reducing operating costs are the main economic motivations for the installation of electronic ticket systems. Magnetic has three different AFC solutions that can be adapted to meet the customer's individual needs.

The drive unit MHTM™ (servo technology), which is used in all products, is a technological milestone and functions maintenance-free, is energy-efficient and operates extremely quietly. The integrated control equipment can be used with all conventional payment systems and makes standard bi-directional use possible.

MPR

This MPR model was designed especially for automatic fare collection in the public transport sector, which calls for a very rapid, contactless separation of persons. The housing is made of high-quality polished stainless steel, is approx. 2 m long and is available in two different versions (standard width and extra wide). Scanner and ticket systems used by the public transport sector can be integrated with no problems. The blocking elements are made of a choice of self-extinguishing PU-foam (choice of colours) or acrylic, for varying passage widths. The parameterisation takes place via DIP switches on the control equipment or by series control. The same interface can be used for communication between the customer PC and our controls. Magnetic makes tools available for a quick start-up. A sensitive touch-recognition sensor prevents injuries or damage. A large number of light barriers in the passage reliably recognise various situations such as persons attemping to follow or unauthorised access or passage in the wrong direction. How the blocking elements should react in these situations can be defined by the customer.

• Energy-saving MHTM™ drive unit
• Quick separation of persons with an
  opening time of approx. 0.3 seconds
• Standard width and wider passages for e.g.
  prams and wheelchairs can be combined
• Free passage in the event of power failure
• Maintenance-free operation, no wearing parts
• Simple integration of identification media

MPW

This MPW model was designed especially for automatic fare collection in the public transport sector, which calls for a very rapid, contactless separation of persons. The housing is made of high-quality polished stainless steel, is approx. 2 m long and is available in two different versions (standard width and extra wide). Scanner and ticket systems used by the public transport sector can be integrated with no problems. The blocking elements are made of a choice of safety glass or acrylic, for varying passage widths. The parameterisation takes place via DIP switches on the control equipment or by series control. The same interface can be used for communication between the customer PC and our controls. Magnetic makes tools available for a quick start-up. A sensitive touch-recognition sensor prevents injuries or damage. A large number of light barriers in the passage reliably recognise various situations such as persons attempting to follow or unauthorised access or passage in the wrong direction. How the blocking elements should react in these situations can be defined by the customer.

• Energy-saving MHTM™ drive unit
• Slim design
• Rapid separation of persons,
  approx. 0.8 seconds opening time
• Standard width and wider passages for e.g.
  prams and wheelchairs can be combined
• Free passage in the event of power failure
• Simple integration of identification media

MPH

This MPH model was designed especially for automatic fare collection in the public transport sector, which calls for a safe, contactless separation of persons. The housing is made of high-quality polished stainless steel, is approx. 2 m long and is available in two different versions (standard width and extra wide). Scanner and ticket systems used by the public transport sector can be integrated with no problems. The blocking elements are available in safety glass or laminated glass, for varying passage widths. The parameterisation takes place via DIP switches on the control equipment or by series control. The same interface can be used for communication between the customer PC and our controls. Magnetic makes tools available for a quick start-up. A sensitive touch-recognition sensor prevents injuries or damage. A large number of light barriers in the passage reliably recognise various situations such as persons attemping to follow or unauthorised access or passage in the wrong direction. How the blocking elements should react in these situations can be defined by the customer.

• Energy-saving MHTM™ drive unit
• Standard width and wider passages for e.g.
  prams and wheelchairs can be combined
• Free passage in the event of power failure
• Maintenance-free operation, no wearing parts
• Gentle and quiet operation
• Simple integration of identification media




Immigration

ABC-Gate

The steady increase in international travel, paired with criminal and terrorist acts, are a cause of headaches for immigration and customs authorities worldwide. Magnetic is a pioneer in the field of developing and installing pedestrian security barriers to support border control. As early as 1996 the first Immigration Barriers were installed at international airports and have proven themselves over many years of use. Worldwide, more than 600 Barriers are now in daily use.

Our Barriers are distinguished both by reliable drive and control technology, and by attractive design – for the most part out of stainless steel and glass. Self-explanatory ergonomics and clear functionality are two further important factors for high passage rates. Security is here an absolute matter of course. Moreover, with the introduction of the MHTM™ drive concept, both the energy costs and the housing dimensions could be reduced significantly. A single Barrier can deal with up to 300 passengers per hour, depending on the testing method being applied. The development of Immigration Barriers takes place in close cooperation with customers, air- or seaport operators and the authorities.

We are glad to offer you additional accessories such as biometric recording devices, passport readers, smart card, RFID, bar code scanners, monitors, loudspeakers etc. You can profit from our decades of experience. Contact us, we will be glad to offer you customised solutions. Our numerous references speak for themselves.

Location Year Type Number of Lanes
Airport Kuala Lumpur 2012 Mantrap, face recognition 49
Airport Dubai 2012 Mantrap, face recognition 28
Airport Brunei 2014 Mantrap, face recognition 3
Airport Munich 2014 Mantrap, face recognition 14
Airport Frankfurt 2014 Mantrap, face recognition 30
Airport Hamburg 2014 Mantrap, face recognition 11
Airport Düsseldorf 2014 Mantrap, face recognition 18
Airport Munich 2015 Mantrap, face recognition 10
Airport Frankfurt 2015 Mantrap, face recognition 26
Airport Berlin-Tegel 2015 Mantrap, face recognition 4
Airport Cologne/Bonn 2015 Mantrap, face recognition 8
Airport Prague 2015 Mantrap, face recognition 10
Airport Salalah/Oman 2015 Mantrap, fingerprint 6
Airport Vienna 2015 Mantrap, face recognition 1

Here's how we work:

The project is complex.
The solutions we develop are: ingenious.

Where production and supply intersect.

The project is complex. It's about an intersection in a production line in the automobile industry. The production line and an access road for delivering the production parts intersect. Just like everywhere in highly productive industrial sectors, production is clocked. It's a rhythm that may only be broken occasionally. Here at BMW in Dingolfing, Magnetic Autocontrol is supplying a system that opens the intersection alternately in both directions. Four barrier booms that can turn 90° block or open one direction at a time. At the same time they block the access in the other direction, and in step with the clocked production the access for delivering the production parts is cleared – and then blocked again. This ensures that no persons or vehicles use the access route and collide with the production line. In the clock breaks, the access is opened and persons or logistics vehicles can pass through. In doing so, the barriers also take the differing relative path widths of almost 2:1 into account and close off the respective area completely.

When bicycles cut across

In this case we're dealing with a chemical group with a multitude of personnel access routes on the extensive company premises. In principle the system should be easily solved with turnstiles and electronic controls – if it weren't for the bicycles which are allowed to be brought onto the premises. So Magnetic Autocontrol developed the MPB barrier. Induction loops in the ground recognise bicycles brought along by persons. An appropriate swing barrier opens for the bicycle, while the person uses the adjoining turnstile. Among the especially interesting parts of this project were the customer's specifications for the design and colour scheme, integrating the access control system into the company's operations, and the request for energy-saving LED lighting technology. The MPB barrier we used here was a completely new development, combined with the expertise gained from MPT and MPG. The basis was MHTM™ technology, which has already proven itself in thousands of barriers. MPB barriers consist of a turnstile and a half-height swing barrier. Depending on the model, the carrier beam houses the motor unit or the locking unit, as well as the control device. For the project described here, the centre column and swing barrier are made of high-quality stainless steel, as is the separating guide element. The supplementary components of the system are galvanized and powder-coated in the corporate colour. The roof trim also offers plenty of room for the corporate logo and barrier labelling.

Glass doors for Warsaw.

The new underground station Dworzec Wileński (Vilinius Station) in Warsaw is an impressive example of a modern underground station. All access systems at this train station come from Magnetic Autocontrol. A part of the advanced design for the fully automatic Fare Collection System is automatically opening glass panels instead of barriers. (In other stations, passengers often simply jumped over the turnstiles.) Magnetic Autocontrol developed a solution based on the system KPH 111/121, which was customised for the exact specifications of Vilinius Station. The systems were developed further, based on experience with the first Warsaw underground line. The result is new, intelligent applications for local public transport – two of them in fact: The standard system is the bi-directional access with a width of 600 mm, and new bi-directional barriers with a width of 900 mm for passengers in wheelchairs, with large luggage or with prams.

Here is where you find us.

Mouseover for Details, Click for Email.

About Us

Setting the benchmark.
Magnetic Autocontrol has been setting the standards for security solutions in the area of access and entry control for many years.

At home in the Black Forest.

The Magnetic Autocontrol Group is one of the world's leading manufacturers of barriers and electronic gates, with its head offic in Schopfheim (+49 7622/695-5) and branches in Australia, China, Malaysia, Brazil, India and the USA.

Magnetic Autocontrol has been part of the international FAAC Group since 2012.

Our prime expertise is in drive and control technology, as well as in conceptual and project work. What is more, we offer complete solutions for your projects involving access control for persons and vehicles. The project is complex. The solution we are looking for is: ingenious.

The framework for this business is our principles and our values: outstanding achievements, teamwork, leadership and responsibility. Individuality is an essential part of our corporate culture and is explicitly desired – by this we also mean allowing the greatest possible freedom for working and acting autonomously.

Safety, security and reliability are always a question of technology. Black Forest commitment. Technical products with superb technical precision are a tradition in this part of Germany. Magnetic Autocontrol comes from the drive technology branch. This core of the brand is likely the reason that wherever absolute reliability of the systems plays an especially important role, you will often find systems by Magnetic Autocontrol.

Send us your message.

We're interested in hearing from you about your project.

Call us

+49 7622/695-5

email

sales@ac-magnetic.com
Or send us your enquiry with the form below.

address

Magnetic Autocontrol Group
Grienmatt 20
D-79650 Schopfheim